Hybridization depends on application and duty cycle

Electrifying heavy equipment sounds great in theory. It’s certainly an admirable goal.  Whether it is also a practical goal depends on your ambitions—cost reduction, decarbonization, health & safety, better power/control, or operator comfort.

It also depends on the machine’s duty cycle, operating environment, infrastructure availability and your project goals. In mining, construction, marine, agriculture and industrial applications, electrification strategies are built around many factors including load profiles, the length of time a vehicle is working for, terrain, regenerative braking opportunities, and charging access.

In applications like underground mining, battery-electric equipment can deliver major operational and environmental benefits. In others, like construction, hybrid diesel/electric equipment often provides a better balance of range, productivity, emissions reduction and infrastructure requirements. If you want to know if your application is ripe for electrification or a hybrid solution, it’s best to study the machine, the application, the duty cycle and other factors in light of your desired goals. That’s where MEDATech comes in.

temp_image

Feasibility First

Before we begin planning heavy equipment electrification or hybridization, we determine whether it makes sense for the application and what configuration would be best.

An electrification feasibility assessment evaluates duty cycle, power requirements, operating conditions, charging opportunities, infrastructure constraints and performance expectations. This process helps determine whether battery-electric, hybrid, or conventional systems are the best fit.

Feasibility studies also help operators evaluate battery sizing, energy consumption, charging requirements, thermal management and projected operational savings before major capital investments are made. Studies also define all major system components, project scope, timelines and deliverables. They deliver a refined budget for prototype build-out and testing, as well as budgetary projections for complete builds. In short, everything necessary for a stakeholder to make a go/no-go decision.

RETROFIT HYBRIDIZATION

Transforming a Diesel Drill Rig into a Battery-Electric/Diesel Hybrid

Exceptional power, improved precision, far better operator comfort, and an 85% reduction in diesel consumption.

Duty cycle determines the right technology

Duty cycle describes how a vehicle or machine operates throughout the workday, including:

  • Load characteristics
  • Travel distances
  • Idle time
  • Terrain
  • Speed requirements
  • Regenerative braking opportunities
  • Shift duration
  • Charging availability

These factors determine whether diesel, hybrid or battery-electric systems make the most operational and economic sense.

Battery-electric and hybrid mining equipment perform particularly well in applications with strong regenerative braking opportunities. Underground mining operations may prioritize battery-electric systems to reduce diesel emissions and ventilation requirements.

Other operations involve long shifts, remote locations, extreme temperatures, or limited charging access. In these situations, hybrid mining equipment may provide the best balance of emissions reduction, productivity, range and flexibility.

temp_image
temp_image

Hybridization as a practical transition strategy

For many operators, hybridization represents a practical path toward decarbonization.

Fully electric fleets remain a long-term objective for many industries, but batteries are still large, heavy and expensive in high-power applications. Charging infrastructure can also be difficult to deploy in remote or continuously operating environments.

Heavy equipment electrification is of course driven by goals beyond fuel savings including reduced maintenance, lower noise levels, improved operator health & comfort, greater torque and power delivery, reduced ventilation requirements and sustainability targets. Hybrid diesel/electric systems address many of these challenges by significantly reducing fuel consumption, emissions and maintenance costs.

Different power solutions within each industry

Even within a single industry, duty cycles can vary significantly. Mining is a strong example. Some haul routes maximize regenerative braking and battery recovery, while others require sustained uphill hauling with limited energy recapture. Underground operations may prioritize battery-electric mining equipment for ventilation and air-quality benefits, while surface operations prioritize uptime, range and productivity.

Construction applications vary as well. Equipment located in urban areas may benefit from battery-electric or hybrid systems because of noise restrictions, power availability and predictable shifts, while remote or high-demand sites may require hybrid solutions for extended runtime.

Agricultural equipment also faces varying workloads, operating hours and power demands. Some applications suit partial electrification, while others require hybrid systems. The application and duty cycle are the major deciding factors.

temp_image
temp_image

Infrastructure matters

Because of the power requirements for heavy equipment, infrastructure availability is always major factor in choosing whether to pursue pure electrification. In isolated environments, the electric power to support charging infrastructure, especially fast charging, is often limited or impractical. For large, power-intensive machines, peak fast-charging demands may be impractical to begin with.

Some operations can support fast charging and scheduled charging windows with the help of on-site power generation and/or storage, which adds cost. The expected lifetime of the operation will, of course, influence the viability of such infrastructure.

In many off-grid or limited-availability situations, hybrid systems can reduce emissions without requiring a complete infrastructure overhaul.

Engineering remains critical

Converting heavy equipment to battery-electric involves far more than replacing an engine with batteries. Engineers must evaluate weight distribution, cooling systems, structural loads, drivetrain integration, vibration exposure, duty cycles, operator requirements and maintenance accessibility.

Whether developing battery-electric equipment, hybrid equipment, or another aspect of fleet modernization, every application requires detailed analysis in order to correctly  customizing the MEDATech AltDrive powertrain.

Heavy equipment electrification must be designed around duty cycles, infrastructure constraints and production requirements. The most effective solutions are engineered to meet clearly defined operational goals, whether reducing fuel consumption, lowering emissions, increasing uptime, improving operator experience, or supporting long-term fleet decarbonization.

temp_image

Developing hybrid and electric drivetrains: it’s what we do

MEDATech has refined the AltDrive powertrain over more than a decade. Since 2014 we have been integrating hybrid diesel/battery-electric powertrains into heavy-duty mobile equipment, large and small, operating in demanding industrial sectors including mining, construction, agriculture, oil & gas, marine, rail and material handling applications. If you’re interested in hybridization, let’s talk. Please fill out the form below and we will be in touch shortly.



    Required



    Required





    Hours: Mon - Fri: 9 Am - 5 PM

    Saturday and Sunday - CLOSED

    Phone: +1 (705) 443-8440

    [email protected]

    Collingwood ON., Canada

    Ocala FL., USA