AltDrive Electric Powertrain Menu
Heavy-duty vehicles have always worked best when the engine, transmission and other drivetrain components are properly sized for the vehicle and the tasks that it was built to carry out. Battery-electric/diesel hybrid drivetrains are no different: they must be engineered around the operating demands of the machine. In heavy-duty industrial applications, drivetrain robustness depends on how well the electrical and mechanical systems are matched to vehicle specs, its day-to-day duty cycle, and its operating environment.
Building a drivetrain to suit vehicle duty cycle applies to both new vehicle platforms and to retrofit projects. Some hybrid conversions retain the OEM diesel engine and integrate electric propulsion and energy recovery systems around it. Others replace major portions of the original drivetrain.
Duty cycle affects every major design decision
Duty cycle influences every aspect of drivetrain design. It affects power delivery, thermal loading, regenerative braking behaviour, driveline stress and battery cycling. A drivetrain intended for intermittent high-load operation will differ significantly from one designed for continuous haulage, underground transport, or utility support work.
Important design considerations include:
- Peak versus continuous power demand
- Vehicle mass and payload variation
- Gradeability requirements
- Shift duration and operating hours
- Hydraulic and auxiliary power demand
- Ambient temperature and airflow conditions
- Surface conditions and wheel slip behaviour
These factors will influence the sizing and selection of motors, generators, batteries, cooling systems, gear reduction and control strategies. Machines with short-duration power spikes may benefit from a smaller diesel engine supplemented by battery power, while continuously loaded machines may require a different configuration.
Hybrid drivetrains require system-level integration
In heavy-duty hybrid vehicles, electrical and mechanical systems are tightly integrated. Unlike diesel engines, electric machines can produce maximum torque almost instantaneously, which changes how loads move through a drivetrain. Instantaneous torque response can improve machine performance, but it also increases stress on driveshafts, gearboxes, couplings, axles and differentials if it’s not managed correctly.
Drivetrain mechanical and electrical systems are engineered together, which is a complicating factor in retrofit projects, where the original vehicle platform was almost certainly not designed for high-voltage systems or electric propulsion components.
Packaging constraints, structural supports, cooling airflow, cable routing, vibration isolation and service access all affect the viability and long-term reliability of a retrofit battery-electric/diesel hybrid drivetrain.
Retaining the OEM diesel engine can simplify some aspects of integration and maintenance, particularly where operators already support an established engine platform. However, the remaining drivetrain components must still be compatible with the hybrid system’s torque characteristics, controls and operating profile.
Component selection matters
Battery-electric drivetrain components have proliferated rapidly. There is a wide range of motors, batteries, inverters, power electronics, charging systems and control hardware available for industrial vehicle applications. Products quickly evolve or are replaced and some platforms disappear entirely.
There is also a very wide range of component quality, durability and safety. Performance specifications alone do not determine whether a component is suitable for heavy-duty industrial use. Thermal stability, environmental protection, controls compatibility, supplier support and long-term reliability are all factors.
Some components integrate well into industrial hybrid systems. Others create avoidable reliability, serviceability, or controls challenges once deployed in real operating conditions. MEDATech engineers evaluate drivetrain components based on real-world integration and operational performance. When required, we stress-test new components. And as the component marketplace evolves, so do our builds.
Heat management is a primary engineering challenge
Effective cooling systems for hybrid drivetrains must be designed around vehicle operating environments, load profiles, available airflow and packaging constraints, e.g. where to place the system. While thermal management for diesel heavy-duty industrial equipment is limited to radiator sizing, battery-electric thermal management requires coordinated cooling of batteries, traction motors, inverters, charging systems and auxiliary electrical components across the entire range of operating conditions.
Most heavy-duty hybrid drivetrains use liquid cooling for major electrical components. Separate cooling loops may be required for batteries and power electronics, particularly where components operate at different temperature ranges or experience different transient loads. Coolant flow rates, pump sizing, heat exchanger placement and control logic all affect system performance and reliability.
Cooling system layout is equally important. Low-speed operation must take airflow into account. Restricted installation space complicates layout and factors such as debris accumulation and exposure to dust or mud must be factored in. In retrofit applications especially, available space can be limited, making heat exchanger placement and service access tricky. Poor access or contamination-prone layouts can reduce cooling effectiveness over time and increase maintenance requirements.
An important part of thermal management is monitoring. Measuring heat throughout the drivetrain allows the control system to manage cooling performance dynamically and protect components as a matter of course and during overload or fault conditions. Sensor placement, redundancy and integration with vehicle controls are important parts of the design process.
A robust thermal management system will continue to perform consistently after long-duration operation in the work environment. The magic is in both the system design and the controls software.