See how hybrid diesel/electric powertrains reduce fuel use, maintenance costs, downtime and total cost of ownership.

For many heavy-duty mobile equipment applications, fuel is one of the largest operating costs. In industries like mining, construction, agriculture, oil & gas, rail and marine transport, fuel consumption has a big impact on operating budgets. And higher running  hours means higher maintenance costs and more emissions.

Battery-electric/diesel hybrid powertrains reduce fuel consumption by combining electric drive systems with diesel generation. There are many possible configurations. Some use both diesel and electric motors to power machine mechanical operations, some use diesel only. Others use diesel power exclusively to extend range or working time. Some can plug in during breaks in order to opportunity charge, while others must rely on the diesel motor for charging. Hybrid systems eliminate the need to wait for charging to happen.

The ideal AltDrive configuration depends on the machine’s power consumption, duty cycle, and your goals. Given favourable scenarios, hybrid systems can substantially lower fuel and maintenance costs, improve worker comfort and safeguard health, while reducing total cost of ownership—all without sacrificing productivity or range.

temp_image

Fuel savings in real-world heavy-duty applications

Hybrid diesel/electric systems reduce fuel consumption by allowing the diesel engine to operate more efficiently and by using battery power during lower-demand periods. In many applications the appropriately sized diesel engine can run at a steady, optimized RPM rather than continuously ramping up and down with changing loads.

This approach reduces fuel waste associated with idling, transient loading, inefficient RPM ranges and the need for oversized diesel engines. Batteries provide peak power support during acceleration, lifting, climbing, or hydraulic demand spikes. This allows the diesel generator to be sized closer to average load requirements rather than peak transient demand.

Hybrid systems commonly reduce fuel consumption by 30% to 50%. In highly cyclical duty cycles, fuel savings can be much higher. MEDATech hybrid systems have demonstrated diesel runtime reductions of as great as 10.5 hours per 12-hour shift.

RETROFIT HYBRIDIZATION

Transforming a Diesel Drill Rig into a Battery-Electric/Diesel Hybrid

Exceptional power, improved precision, far better operator comfort, and an 85% reduction in diesel consumption.

There is a set of duty cycle characteristics that is well suited to hybridization. This includes:

  • Haul cycles with significant braking or downhill travel
  • Intermittent high-load operation
  • Frequent idle periods
  • Stop-and-start duty cycles
  • Hydraulic equipment with variable demand

 

Such duty cycles allow the batteries to handle transient power demands while the diesel engine operates at an ideally efficient RPM or shuts down entirely during low-demand periods.

Consuming less fuel directly affects operating cost per hour. For equipment operating for multiple shifts per day, even moderate reductions in diesel use can produce significant annual savings. In addition to spending less on fuel, lower consumption reduces knock-on costs such as fuel logistics requirements, exposure to diesel price volatility and remote-site fuel delivery costs. In mining and remote industrial operations, fuel transportation can represent a substantial part of total fuel costs. Right now, a good example in Iran. Fuel costs

Reduced maintenance and component wear

Hybrid systems reduce maintenance costs by decreasing diesel engine runtime and therefore stretching out service intervals. Many hybrid systems also stabilize engine operating conditions by shifting variable load demands to the battery-electric portion of the drivetrain. This reduces component wear, which occurs in diesel engines especially during transient loading, rapid RPM changes, idling and repeated thermal cycling.

Hybrid vehicles configured to harness power through regenerative braking add ‘free’ power to their batteries. They also have no need for engine braking and far less need for brake maintenance. Reduced braking needs can also improve vehicle control on grades and declines.

temp_image
temp_image

Extending equipment life with retrofit hybridization

Hybridization can extend the usable life of existing heavy equipment platforms. Many industrial machines remain mechanically viable for decades, long after their original diesel motors become inefficient or costly to maintain. Integrating a hybrid-electric drivetrain can modernize such platforms while avoiding the cost of complete equipment replacement.

This approach can lower capital expenditure, when compared to purchasing new equipment, while improving operating efficiency and reducing fuel consumption.

For fleet operators, retrofit hybridization can provide:

  • Lower capital cost versus replacement
  • Reduced downtime compared to fleet turnover
  • Improved reliability
  • Modernized controls and power systems
  • Reduced operating costs over remaining equipment life
  • Better data from the application. All that stuff is already part of the system. Make better decisions re: maintenance, specific KPIs (tons per hour, operation time etc.)

Total Cost of Ownership matters more than purchase price

Hybrid systems are generally more expensive than conventional diesel powertrains, especially battery-electric machines (as opposed to plug-in electric). It is almost always less expensive to buy a diesel-powered machine, but total cost of ownership (TCO) can be higher and performance is often inferior.

Taking into account fuel costs, maintenance and the high cost of downtime over a machine’s lifetime, the total cost of ownership can be higher with a diesel-only machine. A properly engineered hybrid system can reduce lifetime operating cost while also reducing emissions, improving operator experience and lowering vibration and noise levels.

The key factor in lowering hybrid TCO is application suitability. Duty cycle analysis and electrification feasibility studies are critical in determining what configuration of hybrid system will provide the optimal balance of power and control at the best cost. When hybridization is matched correctly to the equipment workload, the result is a substantial reduction in fuel consumption and often lower TCO over the life of the machine.

temp_image

Developing hybrid and electric drivetrains: it’s what we do

MEDATech designs and integrates hybrid diesel/battery-electric powertrains for heavy-duty mobile equipment operating in demanding industrial sectors including mining, construction, agriculture, oil & gas, marine, rail, and material handling applications. If you are interested in hybridization, we would love to talk. Please fill out the form below and we will be in touch shortly.



    Required



    Required





    Hours: Mon - Fri: 9 Am - 5 PM

    Saturday and Sunday - CLOSED

    Phone: +1 (705) 443-8440

    [email protected]

    Collingwood ON., Canada

    Ocala FL., USA