Rightsizing batteries: range & runtime

Rightsizing batteries for heavy-duty battery-electric/diesel hybrid drivetrains involves determining the battery capacity that best matches the vehicle’s operating profile. That involves the vehicle weight, anticipated duty cycle, and other factors.

Battery composition and sizing is one of the most crucial engineering decisions in designing hybrid drivetrains. An oversized battery increases cost, weight, packaging complexity and charging requirements. It won’t necessarily improve operational performance. An undersized battery may limit runtime, reduce power availability, or shorten battery life through excessive cycling.

The most effective way to rightsize a battery system is through a detailed electrification feasibility study. MEDATech evaluates operating data, runtime expectations, power demands, thermal conditions and integration constraints to determine the appropriate balance of battery capacity, engine size and electrical system performance.

temp_image

Understanding Runtime Requirements

Hybrid industrial vehicles are typically designed around targeted runtime objectives. In many applications, the battery supports only specific portions of the operating cycle while the diesel engine supplies sustained baseline power. In others, the diesel engine only lights up half of each shift or less. Any configuration is possible; it just depends on goals and the work being done.

Battery systems may be designed to:

  • Absorb transient peak loads
  • Reduce engine runtime during low-load operation
  • Power auxiliary systems
  • Enable temporary zero-emissions operation
  • Stabilize electrical loads
  • Support intermittent electric-only operation

 

A targeted approach can allow a hybrid system to achieve operational objectives with significantly less battery capacity than a full battery-electric platform.

Energy Demand vs Power Demand

Power demand determines how quickly energy must be delivered. Many industrial applications for heavy-duty battery-electric/diesel hybrid drivetrains involve short-duration power spikes that are substantially higher than average operating loads. That’s what’s called high ‘power demand’. In these situations, battery power density is more important than total battery capacity, or ‘energy demand’, which is the metric used to measure how long the battery can operate.

A properly engineered hybrid system often allows the battery to absorb rapid load fluctuations while the diesel engine operates within a more stable and efficient operating range.

Battery sizing must therefore account for repeated cycling behaviour, voltage stability, thermal limits, discharge rates and charge acceptance capability rather than focusing solely on total kilowatt-hours.

temp_image

RETROFIT HYBRIDIZATION

Transforming a Diesel Drill Rig into a Battery-Electric/Diesel Hybrid

Exceptional power and serious regenerative braking on downhill haul loop route.
temp_image

Optimizing Runtime Without Oversizing

Designing for maximum runtime is not always the most effective engineering solution. In many industrial applications, the objective is to provide battery support during specific operations rather than maintaining continuous electric operation for an entire shift. In the case of one MEDATech customer, however, we maximized both runtime and power demand.

Battery runtime can be engineered around short-duration operation, standby or idle reduction periods, intermittent high-load actions, defined reserve power requirements, temporary engine-off operation, or other factors. Whatever the case, deciding on requirements ahead of time reduces unnecessary battery mass and cost while maintaining the operational flexibility that the application requires.

Weight, Packaging and Vehicle Integration

A good rule of thumb in designing battery-electric/diesel hybrid drivetrains is to use as little battery as possible. Large battery packs increase vehicle mass, take up valuable packaging space and may require additional structural support or cooling infrastructure.

For mobile industrial equipment, where to put the battery is often as important a question as determining electrical performance needs. In addition to taking up more limited space, an oversized battery can reduce payload capacity, hamper serviceability, and introduce unnecessary thermal management demands.

temp_image
temp_image

Installed Capacity vs Usable Capacity

To improve long-term durability and reduce degradation, battery systems are designed to operate within controlled state-of-charge windows. As with electric cars, common guidance is to charge to 80% of capacity and discharge to no less than 20% of capacity. Exact thresholds can differ, but that’s about 60% of total installed capacity. These numbers can be exceeded, but regularly charging to 100% and discharging to 0% will degrade battery performance more quickly.

To stay within ideal state-of-charge windows, batteries must be sized beyond installed capacity. The advantage of most battery-electric/diesel hybrid drivetrains is that the diesel engine often acts as a generator. Battery management systems are configured to automatically start the engine and begin charging when a minimum threshold is reached and switch off again when state of charge reaches the top of the window.

Engineering the Right Battery System

Rightsizing batteries is ultimately an engineering optimization process that balances runtime, peak power capability, thermal performance, durability, weight, packaging constraints and operational requirements. The result should be a battery-electric or battery-electric/diesel hybrid drivetrain that performs optimally in the duties it was designed for.

temp_image

Developing hybrid and electric drivetrains: it’s what we do

MEDATech develops hybrid drivetrain solutions for vehicles designed for mining, construction, utility, oil & gas, and specialized industrial equipment applications. This includes both new vehicle platforms and retrofit programs. If you are interested in hybridization or electrification, let’s talk. Please fill out the form below—we will be in touch shortly.



    Required



    Required





    Hours: Mon - Fri: 9 Am - 5 PM

    Saturday and Sunday - CLOSED

    Phone: +1 (705) 443-8440

    [email protected]

    Collingwood ON., Canada

    Ocala FL., USA