Hybridization

Battery-electric/diesel hybrid drivetrains for heavy-duty industrial mobile equipment are becoming more common. And for good reason. Properly engineered hybrid systems can reduce fuel consumption and total cost of ownership while improving operator control, comfort, health & wellness; torque delivery; and braking performance, to name a few benefits. Hybrids also provide a number of practical advantages over 100% electric vehicles.

The challenge in building a new hybrid drivetrain, or retrofitting an existing diesel vehicle as a hybrid, is one of configuration. How do you design the right drivetrain for the application? How do you make it work within the vehicle package constraints?

The solution starts with the machine’s duty cycle: the work that it accomplishes in a standard shift. Out of this knowledge comes information about vehicle performance, transient and peak load demand, thermal loading, regenerative braking opportunities, runtime requirements, charging access and infrastructure constraints. All of which affect drivetrain architecture.

There are seven main topics when it comes to designing and building a battery-electric/diesel hybrid drivetrain for heavy-duty industrial mobile equipment:

temp_image

Duty cycle and feasibility

Duty cycle is the work that a machine is designed to accomplish over the course of a standard shift. Analyzing the duty cycle and understanding what you want hybridization to accomplish will show whether it makes technical and economic sense. Fuel savings is just one of many benefits, but a significant one. Hybridization delivers 30% to 50% fuel savings on average and up to 85% for MEDATech customers. The level of savings is very duty-cycle dependent. The most fuel savings gains from a hybrid are applications where there are high peak demands but low average demands.

Machine characteristics and knowledge of its duty cycle, together with your goals, will provide the information required to determine the exact hybrid drivetrain configuration that you need. Load profiles, transient demand, gradeability, shift duration, braking frequency, idle time and charging opportunity all affect drivetrain architecture.

Some applications benefit tremendously from regenerative braking. Others prioritize runtime, peak power support, or infrastructure independence. To find out where the benefits lie, the first step in hybridization typically is to conduct a feasibility study.  

Fuel savings and total cost of ownership

Hybrid drivetrains reduce fuel consumption by decoupling diesel engine operation from transient machine loads. Batteries absorb short-duration peak demand while the diesel engine operates closer to steady-state efficiency. In many cases, machines run exclusively on battery for most of each shift.

Reduced engine runtime lowers maintenance frequency, brake wear and thermal cycling stress. It also comes with health & safety as well as carbon benefits. The total cost of ownership calculus depends on operating hours, fuel logistics, maintenance intervals, infrastructure costs and drivetrain suitability for the application. In the right duty cycle, hybrid systems can reduce lifetime operating cost while increasing productivity.
temp_image
temp_image

Regenerative braking and energy recovery

Some duty cycles enable hybrid drivetrains to recover substantial kinetic energy from braking and use it to charge the vehicle’s batteries. Regenerative braking effectiveness depends heavily on duty cycle characteristics, for example a loaded downhill haul where a vehicle is loaded at the top of a hill and unloaded at the bottom . Effectiveness also depends on battery charge acceptance rates, thermal limits and traction conditions.

High-mass vehicles operating on grades, stop-and-go, or cyclical braking routes generally provide the strongest recovery opportunity. Effective regenerative braking requires coordinated integration between traction motors, inverters, friction brakes, battery systems, thermal management and vehicle controls software.

Building a robust hybrid drivetrain to suit duty cycle

Hybrid drivetrains are engineered around operating loads, the space constraints of the vehicle, thermal conditions, vibration exposure and service requirements. These are all factors in a vehicle’s duty cycle, which dictates the appropriate diesel engine, electric  motor and battery sizing, generator capacity, cooling requirements, driveline stress and controls calibration.

The instantaneous torque that electric motors can deliver changes how loads move through shafts, gearboxes, axles and differentials.  Controls software therefore needs to moderate torque delivery, and robust drivetrain components need to be chosen.  Retrofit programs introduce additional integration challenges involving structural loading, cooling airflow, cable routing, ingress protection and maintenance accessibility.

Long-term reliability depends on coordinated electrical, mechanical, thermal and controls engineering rather than component selection alone. In addition, components need to be selected with life-of-fleet in mind in order to reduce component obsolescence challenges.
temp_image
temp_image

Rightsizing batteries for hybrids: range and runtime

Sizing batteries is an exercise in optimization. It’s a balance between runtime, power demand, thermal performance, vehicle packaging constraints, mass and lifecycle durability.

Rightsizing the battery array for a battery-electric/diesel hybrid drivetrain depends more on transient power demand, regenerative energy absorption capability, discharge rates and cycling behaviour than total installed energy capacity. That’s because in hybrid applications the battery is often charged by the onboard diesel engine.

Oversized batteries increase weight, cost, cooling requirements and take up more space. Undersized systems may reduce power availability or accelerate degradation. Proper sizing depends entirely on the machine’s specifications, operating profile and performance objectives.

Hybrid vs full battery-electric

Hybrid and full battery-electric drivetrains solve and present different operational problems. Full battery-electric platforms eliminate onboard combustion entirely but require significant energy storage capacity and sufficient charging infrastructure to sustain production cycles. Hybrid drivetrains reduce dependence on charging infrastructure by generating part of the operating energy onboard, but they are more complex than all-electric versions. As well, we can’t forget that they still produce emissions, unlike full battery-electric vehicles. The technical distinction lies in how energy is generated, stored, replenished and managed throughout the duty cycle. Runtime requirements, infrastructure availability, charging windows, payload, thermal conditions and operational flexibility all influence the optimal architecture.
temp_image
temp_image

Charging and grid requirements

Charging infrastructure is often the limiting factor in full electrification of heavy-duty mobile equipment. Large battery-electric platforms require very high charging power transfer rates to restore energy within operational downtime windows. This puts major demands on utility capacity, substations, transformers, switchgear and on-site electrical infrastructure.

Hybrid drivetrains reduce this dependency because part of the machine’s operating energy can be generated onboard. In many applications, this lowers charger size requirements or eliminates the need for chargers, reduces peak grid demand and high transfer rates, infrastructure cost and utility upgrade requirements, all while improving deployment flexibility in remote, temporary, or infrastructure-constrained environments.

Developing hybrid and electric drivetrains: it’s what we do

MEDATech develops hybrid and electrified drivetrain systems for mining, construction, agriculture, rail, marine, oil & gas and utility customers. We typically start with a feasibility study, then move on to a retrofit or new build program that includes controls software, drivetrain integration, build-out, commissioning and lifecycle management. If you would like to look further into hybridization or electrification for your vehicles, let’s talk. Please fill out the form below and we will be in touch shortly.



    Required



    Required





    Hours: Mon - Fri: 9 Am - 5 PM

    Saturday and Sunday - CLOSED

    Phone: +1 (705) 443-8440

    [email protected]

    Collingwood ON., Canada

    Ocala FL., USA